Payload Control Room

 

Room 8910, located on Level 89 of the unhardened side of the IPF, provides 1495 sq. ft. Access from the control room to the processing cells is through the Change Rooms.


  1. •35’-6” x 30’-0” and 23’-6” x 23’-6” (1495 sq. ft. total. 1432 sq, ft, net)

  2. •Actual door opening 4'-10" W x 7'-10" H

  3. •Cable conveyances to processing cells

  4. •16” overhead cable tray around room and across center

  5. •SV conveyances

  6. •120 VAC Facility power

  7. •120 and 120/208VAC 3-ph UPS-protected Technical power

  8. •Emergency power cut-off control

  9. •Facility and Technical Grounds

  10. •Dual Fault-Tolerant Fire detection and suppression system

  11. •Central Vacuum System

  12. •Temperature and  Humidity Control

  13. •Access Control

  14. •– CardKey/cipher system

  15. •– Intrusion Detection system (BMS switches and infra-red detectors)

  16. •– Lockable personnel and hardware access doors

  17. •Fiber optic, coax, Twinax and Cat 5 connectivity to the several IPF areas and off-site

  18. •Paging

  19. •Ethernet RJ-45 interfaces

  20. •IRIG-B and Countdown

  21. •IRIG-E

  22. •CCTV monitors and control panels

  23. •Telephone lines

Room 8910 shown with a typical large payload program’s installation of GSE, tables and chairs